Tutte le categorie
electrical power poles
90 Oggetti trovati
Palo trattato di energia elettrica 35F galvanizzato per la linea di trasmissione di Filippine
Treated 35F Electric Power Pole Galvanized For Philippines Transmission Line Mechanical Property The metal supports are designed to withstand the nominal force F and the pressure of the wind V applied at 0.25m from the top. Under these loads, the safety factor with respect to the elastic limit of the steel is larger than 1.8. The post also resists a torque equal to (F+V) ×1m. Tests shows the load intervened when breaking is around 2 times of design load. Galvanization
25 FT di polvere di altezza che ricopre corrente elettrica Palo per la TA di Filippine 30000/anno
25FT Height Powder Coating Electrical Power Pole For Philippines Specifications 1. small floor area & large bearing load 2. reasonable distribution of load carrying capability 3. steel electric pole Product information Steel tower type Tubular steel pole Voltage 220kV and below Material Q235,Q345,Q420 Welding CO2 protection welding or submerged arc auto methods Shape Generally round/polygonal face, and can be designed as the customers require. Surface laye Zink layer with hot
Forza ottagonale 355mpa di 11.8m 4000 Dan Electrical Power Pole Yiled
Polygonal 11.8m 4000 Dan Electrical Power Pole For Transmission Line Project Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers
Fabbricazione a partire da semi di acciaio
Polygonal Shafts Electrical Power Pole with Optional Powder Coating Specifications Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and dimension as per customers requirement Base plate: Base plate is square or round in
12m 14m 2 sezioni Polo di energia elettrica ecologico per la trasmissione di energia sostenibile e verde
12m 14m 2sections Eco-Friendly Electrical Power Pole for Sustainable and Green Power Transmission Specifications Material: high quality Q345 hot rolled steel Mounting Height: 3-30m or according to the requirements of customers Shape of pole: Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine Brackets: Single or double brackets are in the shape and
Pollo di alimentazione elettrica con 10 m di lunghezza con un carico progettato di 300-1000 kg e un alto rivestimento anticorrosione per la trasmissione di energia
Octagonal Conical 10m Electrical Power Pole For Power Transmission with High Anti-corrosion Coating The power pole of our company are made from quality sheets through bending, forming, automatic welding, hot dip galvanization and powder coating. We owned advanced production-line, it included Flatting machine, Steel plate shearer, bending machine, Auto-closed up machine, submerged arc welding machine and powder coating line, and our workmanship and quality control was achieved
Q345 sezione poligonale all'aperto del materiale 30FT Electric Power Palo 1
Outdoor Polygonal Q345 Material 30FT Electric Power Pole 1 Section Specifications: Material Usually Q345B/A572,minimum yield strength>=345n/mm2 Q235B/A36,minimum yield strength>=235n/mm2 As well as Hot rolled coil from Q460 ,ASTM573 GR65, GR50 ,SS400, SS490, to ST52- Design Load in Kg 300~ 1000 Kg applied to 50cm from the to pole Marks Name plate through rivert or glue ,engrave ,emboss as per customer requirement Surface treatment Hot dip galvanized color polyester power or
Classifichi un Electric Power galvanizzato 8M Palo 2.75mm per la trasmissione 110KV
Grade One 8M Galvanized Electric Power Pole 2.75mm for 110KV Transmission Description: Standard Accessory -Top plate -Base plate -Bottom strip -Standard hole -Climbing rung -Anchor bolt -Bitumen protection -Painted marking -Removable ladder Steel The material is in accordance with NF EN 10025 Standard and NF EN 10149 Standard,it has the following property. -Yield Strength=355N/mm2 -Toughness remains the same under 20 degrees below zero. -Galvanization is in accordance with
la immersione calda Q235 di 18m ha galvanizzato il palo di corrente elettrica per la linea elettrica
18m Q235 hot dip galvanized electrical power pole for electric line Specifications 1.Material:ASTM A572,S355,Q235,Q345 or equivalent Internation standard 2.Voltage:10KV,110KV,132KV,220,500KV,or other 3.Serive Lifetime:>30 years 4.Type test and damage test: accepted 5.Welding method:CO2 welding or Submerged arc auto welding 6.OEM service: available The products made by us is high resisitivity against heat ,humidity ,moisture, water etc. Owning to use the rare earth special
