|
Dettagli:
Termini di pagamento e spedizione:
|
| Power: | 10kv~550kv | Tipo: | palo diritto, palo di tensione, palo di giro |
|---|---|---|---|
| Spessore: | 1mm - 30mm | Velocità del vento: | 160km/h, 30m/s |
| Tolleranza: | +/--2% | Carico di progetto nel chilogrammo: | 300~ 1000 chilogrammi applicated a 50cm dal al palo |
| Evidenziare: | pali di distribuzione di energia,pali di potere d'acciaio |
||
Octagonal Galvanized Steel Pole For Electrical Power Line Project
Specification
|
Material: |
high quality Q345 hot rolled steel |
|
Mounting Height: |
3-30m or according to the requirements of customers |
|
Shape of pole: |
Round,conical,octagonal,square,mid hinged,polygonal shafts are made of steel sheet that folded into required shape and welded longitudinally by automaticarc welding machine
|
|
Brackets: |
Single or double brackets are in the shape and dimension as per customers requirement |
|
Base plate: |
Base plate is square or round in shape with slotted holes for anchor bolt and dimension as per customers requirement
|
|
Groung mounted: |
The length buried underground as per customers requirement
|
|
Galvanizing:
|
Hot dip galvanization with thickness of 80-100µm average
|
|
Powder coating: |
Pure polyester powder painting, color is optional |
Production Process
Our factory own advance production line, machine including bending calibration machine, hydraulic plate shears machine, shears machine, slitting machine, 208T hydraulic straightener, etc. All the purpose is to produce good quality steel poles.
The fabrication process as cut plate, bending, forming, automatic welding, drill holes, quality check before galvanized, hot dip galvanized and powder coating, finally quality check according by client’s required.
Features
1. We can supply the product base on client required drawing ,but also can supply the design for any kinds of lamp poles ,electric poles ,street lighting poles, high mast poles ,garden light poles , outdoor lighting ,outdoor lighting poles ,flag poles ,traffic light poles ,lighting ,road lighting pole.
2. Matercial :hot rolled coil from Q235 to Q460 ,ASTM573 GR65, GR50 ,SS400, SS490,ST52-3
3. Deal: Hot dip galvanized Following ASTM A 123 or any other stardand by client required.
4. Packing: Plastic bulble , Mat &Straw Bale or following client required
5. Length : within 16meters once forming( single section)
6. Thickness: from 1mm to 25mm
7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.
8. 110KV to 220kv
9. Easy install and maintenance.
Our Company
Established in 1991,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .
Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on.
We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia , Dominica, Congo, Togo and Guniea so on.
corrente elettrica Palo di spessore NGCP di 3mm per distribuzione di elettricità
Linea di trasmissione corrente elettrica Palo di progetto 18m 10KN per distribuzione di elettricità
Potere d'acciaio 500Dan palo dell'anticorrosivo 14m per la linea elettrica del trasporto di energia
linea di trasmissione elettrica rotonda d'acciaio galvanizzata materiale di 12m Gr 65 Palo Pali
potere palo d'acciaio ASTM A123 di 12m S355 S500 galvanizzato per illuminazione di via
Il multi singolo circuito parteggiato ha galvanizzato Palo d'acciaio per la linea elettrica 132kv
